Named-model research
EP TVL202
2.0 t compact three-wheel lithium-electric forklift. The TVL202 is a geometry-led choice: verify overhead clearance, turning room and pallet aisle before comparing its 80 V performance claims.
Reviewed 2026-09-30 · manufacturer claims remain attributed · quotation-specific evidence required
Published scope
Start with the claim, then identify the offered truck.
The facts below summarize the source reviewed by ForkliftIQ. They do not prove current availability, regional configuration or suitability for a particular site.
Buyer interpretation
The TVL202 is a geometry-led choice: verify overhead clearance, turning room and pallet aisle before comparing its 80 V performance claims.
A model name helps organize research. Technical approval still depends on one exact configuration and a written operating requirement.
Application boundary
The product page connects compact dimensions with a three-wheel, dual-drive layout. The relevant comparison is therefore not only nominal capacity; it is whether the complete truck can pass doors, turn, stack and maintain clearance in the measured site.
Configuration evidence
EP lists a 1,641 mm turning radius and a 1,984 mm overhead guard for the published configuration. Those dimensions should be checked against the current data sheet because mast, options and regional specification can change the offered truck.
Operating-system check
Charging flexibility is useful only when the electrical installation, break pattern and battery plan agree. Ask the supplier to specify the onboard charger, optional external charger, connector and charging limits.
Information to measure before requesting this model
Record the maximum and typical load, dimensions, load centre, pallet or attachment interface, lift height, travel route, gradients, floor and yard condition, doors, overhead restrictions, rack geometry, pedestrian interaction, temperature and expected moves per hour. Define the shifts, charging windows and electrical supply instead of asking a supplier for an undefined runtime.
For a counterbalance or heavy-duty truck, state tyre requirements, outdoor exposure, braking demand and attachment use. For a connected truck, add network boundaries, user roles, data ownership, offline behaviour and system-support expectations. These inputs let suppliers identify exclusions early.
Questions for the quotation
- Do the site height and pallet aisle calculations use the quoted mast and forks?
- Which external charger and input supply are available in the destination market?
- How do tyres and ground clearance limit mixed indoor-outdoor use?
- Which OPS, speed-control and parking functions are included in the quotation?
Documents to request
Ask for the complete model and option codes, a dated model-specific data sheet, dimensions, the configuration-specific load chart, battery and charger data, attachment approval, tyre specification, operator and maintenance manuals, scheduled service requirements and the applicable destination-market conformity records. The contracting party should identify who commissions the truck, provides training, supports diagnostics, supplies parts and carries warranty responsibility.
How to compare an alternative
Build one comparison sheet and hold the operating case constant. Use the same load, load centre, lift height, attachment, aisle or route, gradients, floor, temperature, shifts and charging window for every candidate. Ask suppliers to show where each quoted value comes from and whether it is standard, optional, calculated, tested or dependent on a market package.
Separate truck price from the operating system around it. Include charger and electrical work, battery replacement assumptions, tyres, scheduled service, diagnostic access, software or telematics fees, training, commissioning, freight, spare parts and expected downtime support. A lower equipment price can produce a higher operational cost when these boundaries are omitted.
Commercial and delivery boundary
Record the legal seller, Incoterm, delivery location, included options, excluded installation work, document language, acceptance method, warranty start, response time and responsible service entity. Require written change control when the supplier substitutes a mast, battery, charger, tyre, controller or software package after the technical review.
Parts and service identity
The family name is not sufficient for a parts match. Preserve the data plate, full model, serial number, mast and attachment details, battery voltage, controller and display labels, old component number, connectors, ports, mounting points and dimensions. Ask the source of every proposed replacement: catalogue record, drawing, supersession notice or written manufacturer confirmation.
Evidence boundary
ForkliftIQ has not inspected or tested this truck. Published capacity, dimensions, energy and software statements remain attributed to the manufacturer source. Current availability, exact configuration, regional documentation, dealer authority, lead time, field performance and warranty must be confirmed in writing for the offered truck.
Primary manufacturer source reviewed
https://ep-equipment.com/product/tvl202/Next step