S4E Upper and Lower Radiator Hose Set
91401-06500 / 91401-06600Parts-category illustration for orientation; not a manufacturer warehouse, verified inventory or a model-specific replacement.
Enter an OEM/reference number, engine, model or part name. A match is a research lead, not a stock or fitment promise.
164 deduplicated research entities are held locally for this brand family. Published routes below support further research; a public reference page does not establish compatibility.
91401-06500 / 91401-0660032A68-0030291271-36100MD192297MD34602632B68-0020034601-0130105605-08080ME75906491224-00061Identify Mitsubishi forklift parts from the complete truck model, serial number, engine or assembly plate and full reference. Use the directory to prepare a purchasing enquiry; a matching label or image does not establish compatibility.
S4S and S6S are useful engine research labels, while FD/FG15–30 and the heavier FD groups describe truck routes. Record both identities rather than treating the engine name as the complete forklift model. Keep 4G63, 4G64, S4E and 4DR5 references in their own enquiry context; a shared engine family does not establish matching brackets, wiring, fuel equipment or cooling connections. Diesel, gasoline/LPG and electric trucks require different identification packs. Do not apply an S4S example to an electric truck or assume that a road-vehicle engine part has been approved for a forklift installation.
Start with the route that matches the information you actually hold. Use an engine hub for engine-family research, a model hub for the complete truck context and a reference page for a number already recorded. Keep the original punctuation and suffix in your enquiry. A seller’s cross-reference should identify the applicable source and any supersession rather than silently replacing the number with a shorter code.
| Record | What to include | What it helps check |
|---|---|---|
| Truck identity | Complete model, serial and plate photograph | The applicable equipment and catalogue revision |
| Installed assembly | Engine, controller, transmission or hydraulic assembly plate | The assembly actually fitted, including any replacement history |
| Part reference | Full number, suffix, photograph and catalogue position | The requested item rather than a visually similar substitute |
| Connections and scope | Mounting, ports, connectors, voltage where relevant and included items | Interfaces and complete assembly versus subcomponent scope |
| Commercial evidence | Supply class, condition, maker, documents, lead time and written warranty | A comparable offer with explicit evidence and exclusions |
A parts list should state whether seals, brackets, connectors or other supporting items are included. If the truck has been modified, record the installed configuration instead of assuming that its original model catalogue describes every present component. Qualified personnel should collect inaccessible identifiers using the site’s safe procedure; this directory does not provide removal, live testing or repair instructions.
Logisnext Americas describes dealer-based Mitsubishi parts programmes, including OEM, remanufactured and other-brand replacements. The regional page supports asking which supply class is quoted. Its programme terms and warranty statements must not be transferred automatically to an independent supplier or another region.
Request a written compatibility basis before accepting a quotation. Useful evidence may include the correct catalogue position, a documented supersession and confirmation against your equipment serial. Ask separately about shipping destination, lead time, returns for an incorrectly identified item and exclusions. A page listing or a supplier’s general brand coverage cannot answer those order-specific questions.
Decha includes Mitsubishi in its website’s brand coverage, alongside its principal Linde and Jungheinrich focus. This supports a limited brand-level enquiry route. It is not evidence that Decha has the S4S or S6S sample parts in stock, is an authorised Mitsubishi dealer or has confirmed their installation on a particular FD/FG truck.
Company-controlled source: https://www.dechaparts.com/
If your request concerns a specific assembly, use the controller guide, hydraulic system guide or maintenance parts guide to refine the identification pack. These pages explain component boundaries; they do not add a brand-specific fit approval. Return to the parts directory when the assembly category is still unclear.
Reviewed 3 October 2026. Manufacturer and supplier pages support the stated enquiry routes. No current stock check, supplier authorisation audit or individual reference compatibility approval was performed. Existing examples retain their research status and need order-specific confirmation.
Manufacturer-controlled source: https://www.logisnextamericas.com/en/mit/forklift-parts
No. Record the complete truck model and serial, installed engine or assembly identification, full part reference and interfaces. Engine-family labels narrow a search but do not confirm the truck installation.
No. ForkliftIQ is an independent research directory. Reference pages and supplier profiles help prepare questions; final compatibility needs the applicable catalogue and written confirmation against the equipment identity.
Ask the seller to name the manufacturer, supply class, condition, included items and applicable warranty in writing. Compare the same assembly scope and documentation rather than assuming all quotes describe the same replacement.
Provide clear plate and component photographs, the assembly location, connector or mounting details and the truck serial. Ask for a documented identification route; do not treat resemblance or approximate dimensions as approval.
Use Find my part to organise your equipment identifiers and evidence. Keep unresolved fit questions visible so that a supplier can confirm, decline or request the missing record instead of guessing.