Identify pumps, valves, cylinders and kits before comparing replacement offers.
Prepare a Parts Matching Request →A forklift hydraulic-parts request should identify the truck, the component and its function: lift, tilt, steering or an attachment. Match pumps, valves, cylinders and seal kits through their complete references and applicable drawings. A truck model or a visually similar part alone does not establish a replacement match.
Begin with the component location and the function recorded in the machine’s parts catalogue. Hydraulic arrangements vary between truck types and attachments, so do not assume that every forklift uses the same pump, valve layout or steering system. The pages below separate the enquiry by assembly rather than treating all hydraulic parts as interchangeable.
| Family | Useful identifying information | Continue researching |
|---|---|---|
| Pumps | Complete model code, displacement, rotation, drive or shaft, flange, ports and the applicable circuit specification. | Pump references |
| Control and solenoid valves | Assembly and valve references, circuit function, spool or control configuration, ports and electrical actuation information. | Valve references |
| Lift, tilt and attachment cylinders | Manufacturer and serial identity, bore, rod, stroke, mounting centres, ports and a relevant drawing. | Cylinder references |
| Seal kits and service kits | Cylinder series, revision, kit identifier, rod and bore dimensions, seal material or service class, and kit contents. | Seal-kit research |
| Hoses and fittings | Assembly reference, routing drawing, hose specification, end connections, length and orientation requirements. | Request assembly matching |
Record the truck’s full model and serial number together with the mast or attachment identification where relevant. A replacement may belong to the attachment rather than the base truck. Include the component label, full stamped reference and the parts-catalogue illustration showing its location. Describe whether the request concerns a complete assembly, a valve section, a service kit or a separate wear item.
Use existing documentation and accessible photographs to support the enquiry. If dimensional identification is incomplete, ask the supplier or service organisation what drawing or assessment is needed. This page does not provide instructions for opening pressure systems, removing loaded components, setting relief valves or conducting pressure tests.
Parker’s P1M product information separates displacement, continuous-pressure data, speed conditions and modular controls. Its cylinder specification material describes multiple dimensions, configurations and materials, and introduces the need to consider ancillary components. These manufacturer examples demonstrate why an enquiry needs several attributes. They do not establish that a Parker pump or cylinder replaces a component on a named forklift.
Where a quotation uses a catalogue performance figure, request the exact model, conditions, units and document revision. Do not compare a maximum value from one family with a continuous-duty figure from another. For cylinders and valves, ask which operating conditions the offered component was selected to meet and which differences still require the machine supplier’s review.
Parker’s cylinder parts and seal-kit material distinguishes kit scope and service classes. Use the applicable cylinder documentation to identify the kit. A matching diameter can help narrow the enquiry, but it cannot confirm material, seal arrangement, groove details or that a complete kit has been supplied.
Slow lifting, drift, noise or leakage describes what the buyer observes; it does not identify one failed part. Record the affected function, when the symptom appears, any available fault information and recent service history. The service organisation needs the documentation and assessment appropriate to that truck before deciding whether to repair or replace an assembly.
The won’t-lift research page and maintenance information provide related question routes. Use a documented component identity for the purchasing stage, rather than converting a symptom into an unsupported pump, valve or seal diagnosis.
The following individual profiles connect the system to named companies with corresponding website material reviewed on 2 October 2026. Start with the relevant component family, then obtain a current written response. No listing confirms part compatibility, current inventory or a particular commercial offer.
The controlled product category shows lift, tilt, steering and attachment cylinders for forklift and logistics applications. Use this profile for a cylinder enquiry backed by machine identity and a component drawing.
Website: www.handelic.com
Open supplier profile →The company-controlled website identifies hydraulic-cylinder production and a forklift-attachment cylinder category. Ask which assembly, drawing and operating-condition review it can support for your requirement.
Website: fj-yeya.com
Open supplier profile →The website’s aftermarket catalogue includes a forklift gear-pump reference. Use the profile for a part-number enquiry, and ask the seller to document the offered replacement, condition and applicable machine range.
Website: www.dechaparts.com
Open supplier profile →Specify the required scope before comparing prices. A complete cylinder, a rod-seal kit and a piston-seal kit are different purchases. A pump quotation may also exclude the drive, coupling or other installation items. Ask for the contents, drawing or catalogue reference, condition, included documents, quantity and destination.
Keep technical acceptance, commercial availability and service responsibility visible as separate questions. Request current stock location and an order-specific dispatch estimate. Use the parts-support guide for service and supply planning, and the parts supplier directory to compare additional company profiles.
Official website scopes reviewed on 4 October 2026. Choose the component family first; these profiles provide identification questions and current source boundaries, not an inventory or fitment guarantee.
Filter the reviewed component supplier shortlist · Prepare a component sourcing brief
The truck model is a starting point. Provide serial identity, the pump’s complete reference and applicable shaft, mounting, port and configuration evidence so the supplier can document the replacement.
Not necessarily. Bore, rod, stroke, mounting, ports and the applicable design requirements also need confirmation against a drawing for the required assembly.
No. Confirm the cylinder series or revision, kit identifier, seal arrangement, material or service class and contents using applicable component documentation.
No. A symptom alone does not identify the failed component. Obtain a truck-specific assessment before using a confirmed component reference for a replacement enquiry.
Reviewed 2 October 2026. Parker materials are component-family examples, not a forklift cross-reference. The cylinder parts document applies to its named Parker series; current applicability must be confirmed for the component being ordered. This page does not prescribe pressure values, repair methods or replacement approval.
Parker P1M product information: https://discover.parker.com/p1m
Parker cylinder specification guide: https://discover.parker.com/hydraulic-cylinder-specification-LP
Parker series 2A/2H/3L/VH seal-kit document: https://phconnect.parker.com/divisionalapps/cyl/SerialNumber/seriessealkits/2A,2H,3L,VHCylinders.pdf
Send truck, mast or attachment identity and the component reference. Include existing photographs and drawing information, then ask potential suppliers to state the evidence for their match.
Prepare a Parts Matching Request →