Named-model research
KINOCRANES MST6037
diesel straddle-carrier model in the supplier's 35 / 60 / 80 t source range. Keep the MST6037 diesel column separate from the electric variant and define the actual lifting tool.
Reviewed 2026-09-30 · manufacturer claims remain attributed · quotation-specific evidence requiredEditorial category illustration; not a photograph, engineering drawing or performance record of this model.
Published scope
Start with the claim, then identify the offered equipment.
The facts below summarize the source reviewed by ForkliftIQ. They do not prove current availability, regional configuration or suitability for a particular site.
Buyer interpretation
Keep the MST6037 diesel column separate from the electric variant and define the actual lifting tool.
A model name helps organize research. Technical approval still depends on one exact configuration and a written operating requirement.
Application boundary
A straddle carrier lifts within a frame and is a related heavy-handling category rather than a conventional mast forklift. State the goods, supporting or lifting interface, clearances and route before comparing its rated mass.
Configuration evidence
The source separates diesel MST6037 and electric MST6037EV. This profile uses the diesel column. Do not merge the electric motor or battery entries into the diesel offer, even where dimensions appear similar.
Operating-system check
The model table identifies an oversized-load lifting tool. The general page also discusses container duties. Require a drawing and written approval for the exact tool and goods rather than assuming every application uses one standard container spreader.
Information to measure before requesting this model
Record the maximum load, dimensions, centre of gravity, lifting points, support and restraint, required lift height and loaded route. Show inner-frame clearance, turns, overhead obstructions, surface and gradients.
Request the exact lifting-tool drawing and the responsible supplier's approval for the goods. Describe shifts, fuel support and maintenance access. This page does not turn a general container application into proof of a specific tool combination.
Questions for the quotation
- Which MST6037 power variant and lifting tool are supplied?
- Which drawing and approval cover our goods and lifting points?
- What ground, slope and clearance conditions govern loaded travel?
- Who supplies commissioning, inspections, service and destination documents?
Documents to request
Ask for the complete model and option codes, a dated model-specific data sheet, dimensions, the configuration-specific load chart, engine and fuel data, lifting-tool approval, tyre specification, operator and maintenance manuals, scheduled service requirements and the applicable destination-market conformity records. The contracting party should identify who commissions the truck, provides training, supports diagnostics, supplies parts and carries warranty responsibility.
How to compare an alternative
Build one comparison sheet and hold the operating case constant. Use the same load, load centre, lift height, attachment, aisle or route, gradients, floor, temperature, shifts and energy-supply plan for every candidate. Ask suppliers to show where each quoted value comes from and whether it is standard, optional, calculated, tested or dependent on a market package.
Separate truck price from the operating system around it. Include fuel and site work, engine maintenance assumptions, tyres, scheduled service, diagnostic access, software or telematics fees, training, commissioning, freight, spare parts and expected downtime support. A lower equipment price can produce a higher operational cost when these boundaries are omitted.
Commercial and delivery boundary
Record the legal seller, Incoterm, delivery location, included options, excluded installation work, document language, acceptance method, warranty start, response time and responsible service entity. Require written change control when the supplier substitutes a mast, battery, charger, tyre, controller or software package after the technical review.
Parts and service identity
The family name is not sufficient for a parts match. Preserve the data plate, full model, serial number, lifting system and tool details, engine, controller and display labels, old component number, connectors, ports, mounting points and dimensions. Ask the source of every proposed replacement: catalogue record, drawing, supersession notice or written manufacturer confirmation.
Related heavy handling, not a mast forklift
This category is included so buyers can compare different ways to move large goods. The load is handled within a frame using the specified lifting system. A fork-truck load chart or pallet geometry should not be transferred to this machine.
Draw the goods, lifting points and surrounding clearances. Ask the supplier to identify the approved lifting tool and conditions. The published inner width is one input to that review rather than a complete fitment decision.
One power variant per quotation
The source table has separate diesel and electric codes. Record the full code and engine or battery schedule. A familiar series number does not establish which powertrain, support items or documents the seller will deliver.
Compare fuel or charging infrastructure according to the actual proposal. Preserve regional engine records, service responsibilities and operating assumptions in writing. The presence of a power option on a web page does not establish current availability.
Tool identity and load approval
The source uses different lifting-tool descriptions across the range. Require the tool model, interface, dimensions and approval for the actual goods. State whether a container, frame, bundle or another oversized load is being handled.
Keep the lifting-tool mass and load conditions with the technical review. Ask the supplier to specify inspections, instructions and commissioning evidence. A generic illustration cannot establish the tool, load distribution or operating clearance of the quoted model.
Site and lifecycle review
Ask the responsible parties to review the loaded route and ground requirements. Record turns, slopes, doors, service access and recovery arrangements. A general claim about compacted surfaces is not approval of the buyer's pavement or soil.
Preserve steering, lifting, hydraulic, engine and control identities for service. Request the contracting entity, documentation, installation scope and warranty route. ForkliftIQ has not tested the machine or audited the supplier's performance.
Evidence boundary
ForkliftIQ has not inspected or tested this truck. Published capacity, dimensions, energy and software statements remain attributed to the manufacturer source. Current availability, exact configuration, regional documentation, dealer authority, lead time, field performance and warranty must be confirmed in writing for the offered truck.
Primary manufacturer source reviewed
https://www.kinocranes.com/product/straddle-carrier/Next step