Electric Ride-On Pallet Truck — CBD20-III
Electric Ride-On Pallet Truck, 2,000 kg capacity — a category reference for supplier comparison. Compare the offered model and its own specification sheet.
Representative category illustration; not a verified CBD20-III or Hangcha product photograph.
At a glance
Legacy reference values below are not assigned to the linked supplier. Request the exact model sheet, options and quotation.
Full specifications
| Rated capacity | 2000 kg |
| Drive | AC electric, ride-on |
| Fork length | 1150 mm |
| Max lift height | 140 mm |
| Battery | 24V (indicative) |
| Stand-on platform | Fold-down |
Define the pallet-handling task
Pallet entry and fork geometry
Provide pallet drawings or photos, fork-entry direction, bottom-board arrangement and loaded dimensions. Ask for fork length, overall width, lowered height and load-wheel layout.
Route and floor conditions
Record doorways, turning space, thresholds, dock interfaces and travel distance. Request model-specific dimensions and operating documentation rather than assuming tight-aisle capability.
Operating mode
Separate manual pushing, powered travel and powered lifting. Specify whether the proposal is pedestrian or rider-operated, and identify the exact controls and platform arrangement.
Support and parts identity
Request the model designation, identification-plate example, parts documentation and support scope. A category name or shared capacity is insufficient for a replacement-parts match.
Questions before ordering
Is CBD20-III confirmed as the linked supplier model?
No. The original code and numeric rows remain page references. The official source supports the stated manufacturer family; it does not authenticate the original illustration or the complete configuration.
Which operating details need confirmation?
Confirm the exact rider platform, controls, powered travel and lifting functions. Ask for the proposed battery, charger and destination electrical requirements; the linked XA lithium family does not validate the legacy 24V reference.
What should the supplier quote include?
Send pallet dimensions, maximum load, fork-entry direction, travel route, work frequency, quantity and destination. Request an exact model sheet, included equipment, parts documents, availability, minimum order and delivery terms in writing.
Request a quote on the CBD20-III
Tell us your load, working height and destination port — use those details to request a written, comparable offer.
Get my quoteElectric Ride-On Pallet Truck — CBD20-III supplier research
Hangcha publishes the XA-series stand-on lithium pallet-truck family, listing CBD20 and CBD30 with nominal capacities of 2000 and 3000 kg.
Scope of this relationship: The 2-tonne stand-on category supports supplier discovery. It does not identify the legacy CBD20-III reference as a Hangcha XA model or transfer its 24V battery, fork dimensions or platform design to that family.
Define the load before choosing the truck
Provide the pallet footprint, loaded height, maximum combined mass and direction of entry. Include bottom boards, fork pockets and any overhanging load in the drawings or photographs. Request the offered fork length, overall fork width, lowered height and load-wheel arrangement. Similar tonnage does not establish access to a particular pallet or confirm that the load is distributed as the supplier's rating requires.
Describe the route and work pattern
List travel distance, trips per shift, turning areas, door openings, floor joints and transfers between surfaces. Describe any dock or vehicle interface as part of the requirement and ask for the manufacturer's applicable documentation. Keep pallet movement separate from rack stacking: this low-lift category is not evidence of a stacker's lift-height or rack-capacity capability.
Confirm the rider and energy configuration
Ask whether the proposed rider platform is fixed or folding and request its dimensions in the working and stored positions. Record controls and operator-position requirements from the exact model documents. Identify battery chemistry, voltage, capacity, charger supply and included charging equipment. Keep the XA lithium specifications separate from the legacy CBD20-III reference until the offer identifies one complete configuration.
Prepare one traceable procurement brief
Send the same requirement to shortlisted suppliers and request a written response against each field. The offer should identify the complete model, fork and wheel options, included accessories, documents, support arrangements and delivery terms. Ask which details remain unresolved and who must verify them. Compare technical responses before price; do not replace missing information with assumptions based on this page's reference rows.
Carry the identity into parts sourcing
After a model is confirmed, retain its model sheet and identification details with the purchase record. For later wheel, pump, controller or electrical requests, use the actual assembly and part identifiers rather than the generic truck code alone. The existing parts-matching route can collect those details without assuming interchangeable components or confirmed supplier inventory.