Manual Hand Pallet Truck — DF-25
Manual Hand Pallet Truck, 2,500 kg capacity — a category reference for supplier comparison. Compare the offered model and its own specification sheet.
At a glance
Legacy reference values below are not assigned to the linked supplier. Request the exact model sheet, options and quotation.
Full specifications
| Rated capacity | 2500 kg |
| Fork length | 1150 mm |
| Fork lowered height | 85 mm |
| Max lift height | 200 mm |
| Operation | Manual hydraulic pump |
| Steering wheels | Nylon / PU |
| Net weight | 70 kg (indicative) |
Define the pallet-handling task
Pallet entry and fork geometry
Provide pallet drawings or photos, fork-entry direction, bottom-board arrangement and loaded dimensions. Ask for fork length, overall width, lowered height and load-wheel layout.
Route and floor conditions
Record doorways, turning space, thresholds, dock interfaces and travel distance. Request model-specific dimensions and operating documentation rather than assuming tight-aisle capability.
Operating mode
Separate manual pushing, powered travel and powered lifting. Specify whether the proposal is pedestrian or rider-operated, and identify the exact controls and platform arrangement.
Support and parts identity
Request the model designation, identification-plate example, parts documentation and support scope. A category name or shared capacity is insufficient for a replacement-parts match.
Questions before ordering
Is DF-25 confirmed as the linked supplier model?
No. The original code and numeric rows remain page references. The official source supports the stated manufacturer family; it does not authenticate the original illustration or the complete configuration.
Which operating details need confirmation?
This is a manual hand-pallet-truck research page. A battery is not part of the manual hydraulic requirement. Ask for the offered pump, lowering control, wheel material and fork dimensions.
What should the supplier quote include?
Send pallet dimensions, maximum load, fork-entry direction, travel route, work frequency, quantity and destination. Request an exact model sheet, included equipment, parts documents, availability, minimum order and delivery terms in writing.
Request a quote on the DF-25
Tell us your pallet size, lift height, aisle width and destination port — use those details to request a written, comparable offer.
Get my quoteManual Hand Pallet Truck — DF-25 supplier research
NOBLELIFT publishes the AC/DF hand pallet-truck family. Its parameter table lists DF25 at a nominal capacity of 2500 kg.
Scope of this relationship: The DF25 designation and nominal capacity support this supplier research route, but do not authenticate the original DF-25 illustration or prove that every legacy dimension matches the offered configuration. The official table includes multiple fork-height and dimension options.
Define the load before choosing the truck
Provide the pallet footprint, loaded height, maximum combined mass and direction of entry. Include bottom boards, fork pockets and any overhanging load in the drawings or photographs. Request the offered fork length, overall fork width, lowered height and load-wheel arrangement. Similar tonnage does not establish access to a particular pallet or confirm that the load is distributed as the supplier's rating requires.
Describe the route and work pattern
List travel distance, trips per shift, turning areas, door openings, floor joints and transfers between surfaces. Describe any dock or vehicle interface as part of the requirement and ask for the manufacturer's applicable documentation. Keep pallet movement separate from rack stacking: this low-lift category is not evidence of a stacker's lift-height or rack-capacity capability.
Keep the manual requirement manual
The original reference describes a hydraulic hand pallet truck. Prepare pump, handle, lowering control and wheel questions without introducing a battery specification. Ask how the offered wheel and fork configuration interacts with the actual pallet entry, floor joints and threshold geometry. Do not infer the required pushing effort or route suitability from a nominal load rating.
Prepare one traceable procurement brief
Send the same requirement to shortlisted suppliers and request a written response against each field. The offer should identify the complete model, fork and wheel options, included accessories, documents, support arrangements and delivery terms. Ask which details remain unresolved and who must verify them. Compare technical responses before price; do not replace missing information with assumptions based on this page's reference rows.
Carry the identity into parts sourcing
After a model is confirmed, retain its model sheet and identification details with the purchase record. For later wheel, pump, controller or electrical requests, use the actual assembly and part identifiers rather than the generic truck code alone. The existing parts-matching route can collect those details without assuming interchangeable components or confirmed supplier inventory.