Xilin CBD20S 2.0T Double-Decker Pallet Truck
Category illustration; not a verified XILIN model photograph or loading diagram.
XILIN lists CBD20S and CBD20S-III as pedestrian double-decker trucks. Its table separates a 2,000 kg nominal rating from a 1,000 kg mast-lift rating and a 2,000 kg wheel-arm-lift rating. Compare the exact proposed configuration with the source below and use the existing sourcing request to obtain model-specific documents, commercial terms and availability.
Specifications
| Type | Pedestrian double-decker pallet truck |
| Rated capacity | 2,000 kg nominal; mast lift 1,000 kg in official table |
| Power | Battery electric; lithium options listed separately |
| Voltage | 24 V — published family table |
| Use | Double-pallet handling subject to exact load diagram |
| Documents | Request variant-specific load diagram and model sheet |
Prepare comparable offers
- Identify the full model and suffix on the written quotation.
- Provide actual pallet dimensions, mass and entry direction.
- Separate included equipment from optional battery, fork and control configurations.
- Request current documents and parts identifiers; availability remains a quotation question.
Prepare a sourcing request
Provide the equipment duty or part identity, quantity, destination and required timing so potential suppliers can answer the same written requirement.
Prepare a Sourcing Request →Published family values are a research reference. Confirm the complete model, loading conditions, dimensions and current documents for the offered configuration.
Questions before ordering
Can each pallet carry 2,000 kg?
That conclusion is not supported. The official table separates nominal, mast-lift and wheel-arm-lift ratings. Request the exact variant load diagram and confirmation of simultaneous loading before selecting a configuration.
Does this page confirm stock or certification?
No. Published product information supports supplier discovery. Ask for current availability and the documents applicable to the exact model and destination; this page does not approve an offer.
What should accompany a sourcing request?
Include pallet drawings, maximum loads, route dimensions, work frequency, quantity and destination. Ask for an exact model sheet, included options, parts documentation, commercial terms and a written list of unresolved requirements.
← Back to Electric Pallet Trucks
Xilin CBD20S 2.0T Double-Decker Pallet Truck supplier research
Scope of this relationship: Those separate ratings do not prove 2,000 kg on each pallet or define every combined loading condition. CBD20S and CBD20S-III have different dimensions and lifting configurations; ask for the applicable load diagram.
Separate the two load positions
Give the supplier the mass and dimensions of each pallet independently, along with required upper and lower positions. Request a diagram that explicitly describes the proposed simultaneous loading arrangement. Record any required stacking height separately from low-lift transport. Ask which variant the quotation covers and how its dimensions relate to the actual pallet and doorway. Two pallet positions are a design feature; they are not evidence of doubled output. Compare route time, handling stages and work frequency using your own operation data.
Turn the application into a written requirement
Use one brief for shortlisted suppliers so their responses can be compared against the same task. Include pallet photographs or drawings, loaded dimensions, entry direction, floor interfaces, door openings and turning areas. Describe trips per shift and available charging periods. Separate an essential requirement from a preference; mark unknown measurements for confirmation instead of filling them with a generic catalogue value.
Compare the proposed configuration and documents
Ask each supplier to identify the complete model, included equipment and optional items in writing. Keep its drawing and parameter sheet with the quotation, and reconcile inconsistent numbers before comparing price. Request the applicable operating documents and destination-specific compliance evidence. A manufacturer website is a discovery source, while the current written offer defines what is proposed; neither a shared code nor a nominal rating is a guarantee of site suitability.
Retain identity for parts and support
Keep the final model designation, identification-plate details and component documents with the purchase record. Future battery, charger, wheel, handle, hydraulic or controller requests should reference the actual assembly and identifier. The existing parts-matching path can collect those details without assuming interchangeable components. Ask who will supply documentation and support, what the scope includes and which questions remain open.