
Jinrui CZL-F-002 engine water pump — 4D95/KKO-01
A supplier-coded engine water-pump reference carrying the printed label 4D95/KKO-01. Keep the full label and confirm the installed cooling assembly before requesting an offer.
View product details →Forklift engine water-pump enquiries. Use the documented product family to prepare an exact component enquiry.
Explore four supplier-coded entries, keep each printed engine label intact, and prepare the installed assembly record before comparing an offer.

A supplier-coded engine water-pump reference carrying the printed label 4D95/KKO-01. Keep the full label and confirm the installed cooling assembly before requesting an offer.
View product details →
A Jinrui water-pump catalogue entry labelled 4FE1, with a visibly elongated mounting body. Use the supplier code and an actual interface drawing to compare a proposal.
View product details →
The supplier’s CZL-F-006 reference is labelled 4Y-5F. It remains separate from the adjacent 4Y-7F entry; neither label alone proves a replacement match.
View product details →
A distinct Jinrui catalogue entry labelled 6D95L, shown with a black-coated body and silver drive flange. Confirm the full assembly rather than matching by finish.
View product details →Reviewed 28 October 2026 from the official catalogue and each entry’s three-view gallery. These are supplier references, not verified replacement matches. Original company information and purchasing routes remain below.
Jinrui’s official company introduction describes development, production and sales of forklift and engine water pumps, with separate forklift, excavator, Kubota and Yanmar product routes. The contact page locates the company in Longquan, within Lishui, Zhejiang. The forklift category shows supplier-coded entries associated with engine labels such as 2Z and 4FE1. Those catalogue labels are enquiry leads, not verified replacement approvals. A broad category paragraph also describes hydraulic lifting pumps; this review does not use that paragraph as a technical definition of an engine coolant pump.
For an engine water-pump enquiry, identify the installed engine and cooling assembly separately from the forklift badge. The pump body, drive arrangement, mounting flange, hose connections, pulley and supplied gasket should be itemised where relevant. The enquiry must distinguish a complete pump assembly from an accessory or another pump function.
This profile helps a buyer decide whether a published component family is relevant enough to investigate. It is not a quotation, endorsement, supplier audit or confirmation of an available replacement. Separate the truck manufacturer, model and serial number from the engine or installed assembly identifiers. If a label is unreadable, record that uncertainty. A well-organised request makes missing information visible and helps the supplier explain which documents support its proposal.
Gather the installed component reference, any applicable parts-book entry and clear photographs of the identifying label and surrounding interfaces. Include the complete item rather than only a cropped brand name. Use existing component records or drawings to describe mounting and connection details; do not estimate an unseen feature. Keep photographs and documents tied to the same machine and assembly so that unrelated examples do not accidentally become the basis of a match.
When an engine identity is relevant, retain the complete engine model and serial number. Where an assembly has its own label or supplier code, include it separately. A truck badge can guide a search, but it does not establish which engine variant, component revision or supplier assembly was installed. Ask the quoting party to state what information remains missing and whether it can provide a documented proposal without that information.
Compare the actual item being offered. A component, an accessory and a complete assembly can produce different quotations even when the same product family appears in the heading. Ask whether mounting hardware, seals, sensors, housings or drive accessories are included, where relevant to the identified component. An itemised response makes it possible to compare offers without assuming that every visible part in a catalogue image is supplied.
Keep condition, origin and identification separate. Ask whether the proposed item is new, remanufactured, used or another stated condition, and request the relevant traceability information. A broad claim of original quality is not the same as a documented origin statement for the offered item. If an alternative is proposed, request its complete reference and the stated differences from the installed assembly. This page does not approve a substitute or establish that a different configuration is suitable.
Supplier-coded product entries and familiar engine names are not independent compatibility evidence. The website domain and product labels do not establish Yanmar, Kubota or another manufacturer’s authorization, genuine origin, current stock or fitment.
Product-category headings establish how the supplier organises its website. They do not independently establish performance, test results, certification, service life or the buyer’s exact application. Treat a catalogue search as a way to formulate questions, then obtain an offer that names the component and records its matching basis. Do not turn a familiar engine name or nominal size into an automatic replacement decision.
Ask which current entity issues the quotation and invoice, and which location handles dispatch. Website brand names, company names and contact locations can serve different roles. The identity descriptions above are retained so that the buyer can clarify the transaction rather than relying on an assumed relationship. ForkliftIQ has not contacted the supplier, inspected its premises or verified its current production resources.
Send the same identification pack and quantity requirement to each shortlisted supplier. State the destination and requested supply scope, and ask the party to explain its present lead time and packing arrangement. Keep the final agreed reference in the quotation, packing description and dispatch identification. Price and delivery statements should come from a current written offer; this directory does not publish a stock or commercial commitment.
No. A supplier website can establish a research route, but the exact application still requires documented matching.
No. Request current evidence from the entity issuing the offer if authorization or genuine origin affects the purchase.
No. It organises procurement identification. It does not prescribe servicing, testing, removal, installation or machine operation.
Prepare the installed component record, use the relevant matching guide and compare written proposals that explicitly cover the same supply scope.
The company, contact and product-category bodies were actually read on the review date. Supplier-published performance, capacity, export coverage and certification claims are not independently verified here. The hero is a digitally created component reference, not this supplier’s product or factory photograph.
https://cn.yanmarwaterpump.com/about/
https://cn.yanmarwaterpump.com/contact/
https://cn.yanmarwaterpump.com/product/forklift-pump-series/