Supplier product reference · reviewed 19 October 2026
One milky-cover strip-light family covering three table lengths; distinguish the documented 12V variants from optional voltage and sensor descriptions.
Published identification
Supplier-published entries. Ratings and configuration still require current documentation.
The NSL source groups three lengths under one milky-cover interior-light family: NSL25, NSL50 and NSL100. Their published dimensions and power entries are retained in one page rather than creating near-duplicate pages for each length. The reference image is a close-up showing one end cap and a section of diffuser; it does not establish a complete length, an unseen far end or supplied mounting accessories.
The table gives 12V for all three rows, while the body also refers to 10–16V and 24V options. PIR sensing is described as available rather than standard. Those alternatives must be tied to an exact offered version. The supplier's lumen and maximum-power figures are not independently tested here, and this page does not calculate or promise efficacy from them.
Procurement checklist
Keep the item identity, physical version and supply scope together. Use the questions alongside the published specifications when preparing a sourcing brief.
Request the full NSL25, NSL50 or NSL100 reference with the intended voltage, colour temperature, cable length and sensor option. Ask whether any PIR component is built in, separately supplied or absent. The common NSL family prefix is not enough to select a battery interface or assume that a 24V alternative is the same item as the 12V table row.
Ask for overall length, end-cap envelope, clip positions, cable exit and bracket details. The cropped source presentation is useful for recognising the diffuser profile but cannot establish full dimensions or included fixings. Confirm clip and bracket quantities separately in the packing list, and retain the mounting constraints of the intended compartment or equipment with the enquiry.
Request the test conditions behind lumen, power and colour-temperature entries for the actual revision, together with any applicable environmental or electrical documentation. The page does not establish lumen maintenance, glare, ingress protection or suitability for wet areas. An optional PIR description is not evidence of detection range, timing or integration with an existing control system.
This family page covers the table variants together while keeping their references and length/power entries distinct. It is supplementary interior illumination, not a marker, brake, indicator or reversing lamp. A milky diffuser and matching length do not establish compatibility with an existing light's clips, wiring or supply. Request the exact offered configuration and documents before comparing replacements.
The official source supports the NSL family and its three table rows. Optional voltage, sensor scope, output, mounting parts and application suitability remain revision-specific matters. The cropped presentation is not full-length, dimensional, environmental or performance evidence.
This reference is neither a quotation nor a stock, delivery or authorisation commitment. Request a current written proposal from the quoting entity. Preserve the item reference, quantity, destination and included accessories in that proposal so that changes of configuration remain visible.
https://www.novavehicle.com/interior-led-light-bar.html
Product body and specification table reviewed on 19 October 2026. Purchasing explanations are ForkliftIQ editorial guidance. No repair, wiring or installation procedure is provided.
Family comparison · 19 October 2026
The fresh official NSL table still identifies NSL25, NSL50 and NSL100. Its lengths, 2/4/6 W maximum-power entries and 12 V supply rows resemble the webpage table for NSLP25/50/100. That overlap is not a supplier statement that NSL and NSLP are aliases. The named families, cover descriptions and available documents must remain attached to the offered part.
The NSLP catalogue uses a different shortest code, NSLP30, and different cross-sections and electrical entries from its webpage. Those PDF values cannot be used to fill an NSL specification. NSL’s own body discusses 10–16 V or 24 V options while the table says 12 V. Request the exact voltage version and current drawing; do not widen the table range using a neighbouring family’s description.
Keep the NSL reference, diffuser, total envelope, cable, mounting clips and optional PIR arrangement together. If an offer is described as an alternative to NSLP, ask the supplier to identify the mechanical and electrical differences explicitly. Matching 500 mm length or 600 lm wording does not prove matching end fittings, light distribution, dimming or supplied components. The source photograph remains a partial detail, not full-length evidence.
The entries above are supplier-published descriptions. They do not verify stock, authorization, certified performance or compatibility with a particular forklift. Use the existing supplier and sourcing routes with the full selected reference, quantity, destination and required documents. No repair or wiring procedure is provided here.
https://www.novavehicle.com/interior-led-light-bar.html