Keep component identity, signal interface and intended function together.
Prepare a Parts Matching Request →Identify the sensing, switching or warning function before selecting a component route. A sensor purchase, a warning-device purchase and approval of a vehicle safety function are different decisions. This guide helps document an enquiry; it cannot certify the system.
| Family | Information to retain | Continue research |
|---|---|---|
| Position and speed sensors | Original reference, sensed function and documented signal interface. | Sensor references |
| Motor feedback components | Encoder reference, motor relationship and applicable control document. | Feedback references |
| Limit and operator switches | Complete switch identity, contact arrangement and equipment function. | Switch references |
| Alarms and warning lights | Device label, mounting, supply record and intended indication. | Warning-device references |
| Display and load indication | System model, indication function, sensor relationship and documentation. | Instrument references |
Identify whether the request concerns speed, steering position, lift position, operator presence, a limit condition or a warning indication. Use the component label and existing equipment documents to name the function. Do not infer it from a connector or enclosure. A current Curtis input-device example describes steering sensors that provide wheel-position, speed and direction data to an electronic steering system. That example does not mean every sensor can perform those functions or that every truck uses that architecture.
Provide the full component number, truck model and serial number, connector identity and available wiring or system-document reference. Include a mounting drawing or safely accessible photographs. Where the existing record names a signal, supply or communication interface, retain that information with its source. Mark unknown fields unknown. Similar pin count or nominal supply information does not identify the pin assignment, protocol, configuration or acceptable replacement. Ask for the exact proposed model and a documented comparison.
A load-indication or weighing enquiry may involve sensors, a display, software and installation-specific configuration. Wanpu’s controlled website lists forklift weighing together with load-indicator and sensor categories. Ask which parts form the proposed system and which equipment-specific review remains outstanding. A broad application listing does not prove measurement accuracy on your forklift, certify a safety function or authorise a retrofit. Keep these acceptance questions distinct from the commercial quotation.
A beacon, reverse alarm or other warning device can be identified as a purchased component without declaring that it provides the required protection for a site. Define the existing device, intended indication and documented electrical interface. Any change to interlocks or safety-related functions needs the responsible qualified equipment process. This page contains no bypass, wiring, sensor-testing or return-to-service instructions. Describe an unresolved symptom honestly rather than naming a failed switch to make the enquiry look complete.
Decha’s website shows a specific Jungheinrich steering-sensor reference. It supports a narrowly described supplier discovery route rather than proof of stock, OEM authorisation or compatibility across a brand. Ask for the quoted identifier, condition and supporting documentation. For an electronic module or instrument, clarify configuration and what is included in the unit. Preserve unresolved interface differences in the enquiry so a seller cannot silently replace the specified component with a superficially similar item.
These company routes are tied to readable manufacturer or company-controlled material reviewed on 2 October 2026. Use the stated scope to begin a shortlist. A profile does not establish current stock, certification, authorisation or a match for your truck.
The current aftermarket catalogue includes a Jungheinrich steering-sensor reference and a diagnostic gear-ring repair-kit reference. Keep the specific reference and truck serial identity together when requesting a proposal; no listing establishes stock or universal compatibility.
Website: www.dechaparts.com
Open supplier profile →The company website identifies forklift weighing among its products and lists load indicators, sensors and accessories. Use this route for an instrument-system enquiry, with the truck configuration and intended indication function clearly described.
Website: www.ycwpkj.com
Open supplier profile →For additional candidates, use the parts supplier directory. Ask each supplier to return the exact proposed item, condition, included documents, unresolved differences, quantity, destination and current delivery terms. Keep technical acceptance separate from commercial availability.
Treat the weighing instrument as a defined system. Ask which sensors, display, harness, mounting items and application documents are included, and which items remain outside the offer. A display for weighing cargo is a different request from the truck dashboard, motor encoder, steering sensor or operator-presence switch. Keep each identifier separate so a familiar enclosure or connector does not become a substitute for the actual system reference. TLX60 is a supplier-published product reference, not an approved replacement for a truck dashboard or a universal retrofit. The website’s broad claims about easy installation across different forklifts are not adopted as matching evidence. ForkliftIQ has not verified weighing accuracy, calibration, legal-for-trade status, functional-safety certification or suitability for your machine.
Yichang Wanpu Technology — company scope and matching questions
Original company-controlled bodies reviewed on 4 October 2026. Inclusion confirms a research route; it does not confirm inventory, authorization or fitment.
No. The function, complete reference, documented signal or protocol, mounting and vehicle configuration also need confirmation.
No. Buying a device and approving a vehicle or site safety function are separate decisions.
Send the forklift identity, system model if present, sensor and display references, intended indication and current documents. Ask the supplier to define the complete proposed scope.
No. It provides component-enquiry information and does not approve bypasses, wiring changes, safety integration or return to service.
The references below support the stated category and identification examples. Manufacturer marketing statements are not treated as independent tests. No model-specific operating values, repair procedures or performance promises are inferred for another machine.
Send the equipment identity, complete component reference, existing drawings or label photos, requested scope, quantity and destination. Mark missing information unknown and ask suppliers to answer the same written requirement.
Prepare a Parts Matching Request →